PRODUCTS

  • home
  • PRODUCTS
  • K-CUT

CUTTABLE HEAT TRANSFER VINYL

K-CUT

Home > Products > K-PRINT >Printable glitter HTV

K-PRINT GLITTER

CDFLEX htv glitter vinyl provides a dazzling finish, ideal for fancy design, even you will be amply satisfied with its high-colored printing.
Made using the latest technology in printable HTV vinyl from the world's best heat transfer vinyl manufacture.

VA.pdf첨부파일

WE RECOMMEND THE FOLLOWING
CONDITIONS TO ACHIEVE THE BEST RESULTS WE

  • Temperature

    150℃

  • Pressure

    34psi

  • Time

    10sec

  • Peel Type

    Hot peel

  • Washing

    machine and handwash only

RECOMMENDED FABRICS

COTTON,POLYESTER,POLY/COTTON BLENDS

CUTTING GUIDELINES *If you have dIFferent kinds of cutting machine, you should always test cut prior to any production run.

PLOTTER BLADE FORCE OFFSET SPEED DEPTH
ROLAND SG-540 60º 130~170 g/f 0.275mm 10cm/sec 0.4~0.7mm
ROLAND VS-300
ROLAND BN-20
PRINTER TEMP PASS
ROLAND SG-540 PRINT 38±2 DRY 40±2 8
ROLAND VS-300
ROLAND BN-20 NONE NONE

 

HOW TO USE

  • SET MATERIAL

    Feed the printable HTV vinyl material into the plotter machine hotmelt side facing up.

  • PRINT & CUTTING

    Select an existing design or create your own on the computer (NB : Design must be mirrored.)
    Change the machine settings according to the heat transfer vinyl material's conditions (If unsure, see the PDF provided above.)

  • WEEDING

    On a flat surface take a weeder and remove any parts not necessary for your design of heat transfer vinyl

  • TRANSFER

    In order to remove the design from PET, it must be attach to the adhesive side of MASK PAPER.
    After application, it's essential to ensure there are no air bubbles and the design is firmly stuck to the adhesive side.

  • PEEL OFF PET

    Peel off PET from the transferred printable HTV vinyl to apply to your garment.

  • PREHEAT & POSITION

    The ideal heating, pressure and time conditions for the pressing of a printable HTV vinyl can be seen in the photo above.

  • HEAT APPLY

    Preheat the garment and arrange the weeded design in your desired placement and then press the printable HTV vinyl.

  • PEEL OFF

    Gently remove Pet from the top side of the design.