PRODUCTS

  • home
  • PRODUCTS
  • CUTTABLE

CUTTABLE

GLOW IN THE DARK

Adds that ‘something special’ to your costumes and special event wear. Has the look of normal film during the daytime and at night it provides a luminous, long-lasting glow.

  • Yellow only
  • High wash resistance
  • Catches the light and glows under dark conditions

WE RECOMMEND THE FOLLOWING
CONDITIONS TO ACHIEVE THE BEST RESULTS WE

  • Temperature

    150℃
  • Pressure

    34psi
  • Time

    10sec
  • Peel Type

    Warm peel
  • Washing

    machine and handwash only

RECOMMENDED FABRICS

COTTON,POLYESTER,POLY/COTTON BLENDS

CUTTING GUIDELINES *If you have dIFferent kinds of cutting machine, you should always test cut prior to any production run.

PLOTTER BLADE FORCE OFFSET SPEED DEPTH
ROLAND GS-24 45º 130~160 g/f 0.250mm 15cm/sec 0.3~0.5mm

COLOR CHART

HOW TO USE

  • SET MATERIAL

    Feed the material into the plotter machine hotmelt side facing up.
  • CUTTING

    Select an existing design or create yo ur own on the computer (NB : Design must be mirrored.)
    Change the machine settings according to the material's conditions (If nsure, see the PDF provided above.)
  • WEEDING

    On a flat surface take a weeder and remove any parts not necessary for your design.
  • PREHEAT & POSITION

    The ideal heating, pressure and time conditions for press can be seen in the photo above.
  • HEAT APPLY

    Preheat the garment and arrange the weeded design in your desired placement and then press.
  • PEEL OFF CARRIER

    Gently remove PET film from the top side of the design.