PRODUCTS

  • home
  • PRODUCTS
  • CUTTABLE

CUTTABLE

PRINTABLE CLEAR

Do you want to see your own pattern or color of the garment well? Then, we recommend Printable Clear!

WE RECOMMEND THE FOLLOWING
CONDITIONS TO ACHIEVE THE BEST RESULTS WE

  • Temperature

    150℃
  • Pressure

    34psi
  • Time

    10sec
  • Peel Type

    Hot peel
  • Washing

    machine and handwash only

RECOMMENDED FABRICS

COTTON,POLYESTER,POLY/COTTON BLENDS

CUTTING GUIDELINES *If you have dIFferent kinds of cutting machine, you should always test cut prior to any production run.

PLOTTER BLADE FORCE OFFSET SPEED DEPTH
ROLAND GX-24 45º 90~130 g/f 0.250mm 15cm/sec 0.1~0.3mm
PRINTER TEMP PASS
POLAND VP-540 PRINT 38±2 DRY 40±2 8

HOW TO USE

  • SET MATERIAL

    Feed the material into the plotter machine hotmelt side facing up.
  • PRINT & CUTTING

    Select an existing design or create yo ur own on the computer (NB : Design must be mirrored.)
    Change the machine settings according to the material's conditions (If unsure, see the PDF provided above.)
  • WEEDING

    On a flat surface take a weeder and remove any parts not necessary for your design.
  • TRANSFER

    In order to remove the design from PET, it must be attach to the adhesive side of MASK PAPER.
    After application, it's essential to ensure there are no air bubbles and the design is firmly stuck to the adhesive side.
  • PEEL OFF PET

    Peel off PET from the trasnfered to apply to your garment
  • PREHEAT & POSITION

    The ideal heating, pressure and time conditions for press can be seen in the photo above.
  • HEAT APPLY

    Preheat the garment and arrange the weeded design in your desired placement and then press.
  • PEEL OFF

    Gently remove Pet from the top side of the design.